SETTING GPRS HSDPA 3 THREE

SETTING GPRS MMS 3

General Setting (Parameter yang digunakan untuk melakukan koneksi & MMS dengan jaringan 3)

Setting GPRS Data Bearer : GPRS
Access point name : 3gprs
User name : 3gprs
Password : 3gprs
Home : http://wap.three.co.id
Phone IP Address : Automatic
Proxy Server Address : 10.4.0.10
Proxy port number : 3128

Setting MMSConnection name : 3mms
Data bearer : GPRS
Access point name : 3mms
User name : 3mms
Prompt Password : No
Password : 3mms
Authentication : Normal
Gateway IP address : 0.0.0.0
Homepage : http://mms.three.co.id
Phone IP address : Automatic
Primary name server : 0.0.0.0
Secondary name server : 0.0.0.0
Proxy server address : 10.4.0.10
Proxy port number : 3128

SETING 3 HSDPA

Daftar MAU DATA ke 234

User name, pass word, APN : 3data, untuk gprs = 3gprs

BERHENTI STOP-DATA

II. Nokia
GPRS Parameter Setting1. Masuk ke Menu, click Services > Option > Settings > Default Access Point > Options > New Access point > Use default settings

2. Ganti parameter GPRS yang dibutuhkan seperti yang dijabarkan dibawah ini
Connection name – 3gprs
Data bearer – GPRS
Access point name – 3gprs
User name – 3gprs
Prompt Password – No
Password – 3gprs
Authentication – Normal
Homepage – http://wap.three.co.id
Connection Security – off
Session mode – permanent

3. Press Option > Advanced Setting, Masukkan parameter yang dibutuhkan seperti yang dijabarkan dibawah ini :
Phone IP address – Automatic
Primary name server – 0.0.0.0
Secondary name server – 0.0.0.0
Proxy server address – 10.4.0.10
Proxy port number – 3128

MMS Parameter Setting1. Go to Menu, click Messages > Option > Settings > Multimedia Messages > Access Point in Use > Options > New Access point > Use default settings

2. Change each MMS parameter to this value:
Connection name – 3mms
Data bearer – GPRS
Access point name – 3mms
User name – 3mms
Prompt Password – No
Password – 3mms
Authentication – Normal
Gateway IP address – 0.0.0.0
Homepage – http://mms.three.co.id

3. Press Option > Advanced Setting, fill in the parameters with these values:
Phone IP address – Automatic
Primary name server – 0.0.0.0
Secondary name server – 0.0.0.0
Proxy server address – 10.4.0.10
Proxy port number – 3128

4. Press Messaging > Options > Setting > Multimedia Message, fill in the default setting with the values below.
Access Point in use: 3mms
Multimedia reception: always on
On receiving message: Retrieve immediately
Allow anonymous messages: yes
Receive adverts: yes
Receive report: yes
Deny report sending: no
Message validity: maximum time
Image size: small
Default speaker: loudspeaker

TrackBack Identifier URI